AtriClip FLEX-Mini Device

The Next-Generation, Closed-Ended and Smallest Surgical LAAM Device

Request More Information

Product Features

Lowest profile surgical LAAM device in the market to optimize access and placement
Clinically proven to provide both mechanical¹ and electrical isolation of the LAA²
In-line springs offer continuous dynamic closing pressure
Angled end-effector for increased visibility
One-handed application

1. Data on file.
2. Starck, C.T. et al. (2012). Epicardial left atrial appendage clip occlusion also provides the electrical isolation of the left atrial appendage. Interactive cardiovascular and thoracic surgery, 15(3):416-18. This human clinical study demonstrated acute electrical isolation. Chronic electrical isolation has not been evaluated in human clinical studies.

AtriClip FLEX-Mini Device open and closed

The AtriClip LAA Exclusion System is indicated for the exclusion of the heart’s left atrial appendage, performed under direct visualization and in conjunction with other cardiac surgical procedures.

Direct visualization, in this context, requires that the surgeon is able to see the heart directly, with or without assistance from a camera, endoscope, etc., or any other appropriate viewing technology.

Smaller Profile

60% smaller than the lowest profile surgical LAAM device in the market

Tighter Weave Polyester

Tighter weave, braided polyester fabric cover with comparable stability to other AtriClip devices

The Next-Generation AtriClip Device

AtriCure’s AtriClip devices are the most widely implanted LAAM devices in the world, providing a permanent solution to LAA exclusion during cardiac procedures.

600,000+

AtriClip Devices Sold

20+

Years of Expertise and Innovation in LAAM

90+

Published Studies Including AtriClip Devices

Over 20 Years of Innovation in LAAM

AtriCure has worked tirelessly to create a line of AtriClip devices that permanently exclude the LAA.

PRODUCT CODES:

ACHM35 (35 mm)
ACHM40 (40 mm)
ACHM45 (45 mm)
ACHM50 (50 mm)

MRI SAFETY INFORMATION:
MR CONDITIONAL
The AtriClip Mini is MR Conditional. A patient with the AtriClip Mini may be safely scanned under the following conditions.

Nominal Values of Static Magnetic Field: 1.5-Tesla or 3.0-Tesla
Maximum Spatial Field Gradient: 40 T/m (4,000 gauss/cm)
Type of RF Excitation: Circularly Polarized (CP) (i.e., quadrature-transmission)
Transmit RF Coil Information: There are no transmit RF coil restrictions. Accordingly, the following may be used: Body transmit RF coil and all other RF coil combinations (i.e., body RF coil combined with any receive-only RF coil, transmit/receive head RF coil, transmit/receive knee RF coil, etc.)
Operating Mode of MR System: Normal Operating Mode
Maximum Whole Body Averaged SAR: 2 W/kg (Normal Operating Mode)
Limits on Scan Duration: Whole body averaged SAR of 2 W/kg for 60 minutes of continuous RF exposure (i.e., per pulse sequence or back-to-back sequences/series without breaks)
MR Image Artifact: The presence of this implant produces an imaging artifact. Therefore, carefully select pulse sequence parameters if the implant is located in the area of interest.

PM-US-3444B-1026-G

Download

Product Brochure